|
|
| applications (see COMMENTS) |
| Intended for 4S (16.8 Volt) operation |
| Standard Neo rotor on a 5mm shaft |
| High end bearings for trouble free operation |
| Machined integrated cooling fins |
| 4 pole, slotted, brushless motors wound 1 turn in a Y |
| configuration |
| ESC: Designed for extreme 1/8 scale monster truck applications |
| Profiles can be custom designed on a PC |
| Infinitely adjustable throttle and brake curves with timing |
| advance |
| Punch Control allows dialing in horsepower where needed |
| Brake Strength allows straight tracking under hard braking |
| Drag Brake helps entry into corners |
| Start Power for smooth launches |
| Programmable cutoff voltage for LiPo usage |
| On/Off switch |
| Universal receiver connector |
| |
| INCLUDES: 2650kv Neu/Castle motor |
| 18T Pinion gear |
| Mamba monster version 3 speed control |
| |
| REQUIRES: Installing into vehicle |
| USB Cable |
| |
| SPECS: Motor: Length: 67.78mm (2.67") |
| Diameter: 39.98mm(1.57"), 41.78mm (1.6") with fins |
| Weight: 121g (0.27lb) |
| Shaft Diameter: 5mm (.2") |
| Max Input Volts: 16.8V |
| Amp Rating: 120 |
| Wire Lead Guage: 10 ga |
| |
| ESC: 6 cell LiPo |
| Continuous: N/A |
| Resistance: .0003 Ohm |
| Brake: Proportional with adjustable curve |
| Reversible: Yes, with lockout |
| Low Voltage Cut-off: Programmable |
| Size: 2.2 x 1.9 x 1.4" (56 x 48 x 35mm) |
| Weight: 4.3oz (121g) |
| Connector Type: 6.5mm |
| |
| COMMENTS: Use 2200Kv motor for Monster Truck and 1/8 scale Truggy Applications |
| |
| BOX DIMENSIONS: 6.25" W. X 3.25" H. X 8.25" L. |
| BOX WEIGHT: 1.63 LBS. |
