|
Great Planes Slinger Electric Flying Wing ARF
ITEM # GPMGPMA1180-GP
Start assembly after lunch — fly it for hours before supper!
Every ARF should be this easy to enjoy! The only things required to make the Slinger ARF flight-ready are 6-minute epoxy and 30 minutes of easy assembly. All-foam parts make it a snap to assemble and tough to damage — electric power makes it great for quick, "grab n' go" flying. A Speed 400 motor and prop provide the power for astonishing stunts at a wide range of speeds. Rock-solid stability and B2 bomber looks provides pilots with the inspiration — and confidence — to try almost anything!
This is the Radio Controlled, Electric Powered, Great Planes Slinger Almost Ready-to-Fly Expanded Foam Flying Wing Kit For Intermediate to Advanced Modeler/Fliers.
Key Features:
- Assembles in a half-hour — no building or painting required.
- Rugged and resilient expanded foam parts offer outstanding resistance to rips, bends and breaks.
- Easy to transport. Spans just under four feet and has no landing gear to bend or break.
- Goes aloft with a hand launch and skids to a landing on its belly.
- Included winglets attach with epoxy and stabilize flight throughout the entire performance envelope.
Items Included in the kit:
- Speed 400 motor with two props
- two wing halves
- center section,
canopy, Velcro tape strip, pushrods with tubes
- wing fins, decals, control horns, battery connector
- photo-illustrated instructions,
nylon tie strap, wing tape, and center section tape.
Airplane Specs:
- Wingspan: 47.4" (1204mm)
- Wing Area: 462.8sq in (29.85sq dm)
- Weight: 27oz (765g)
- Wing Loading: 8.4 oz/sq ft (25.6 g/sq dm)
- Center of Gravity: 8" (203mm) Back from front tip of plane inverted
- Control Throws: Low Rate High Rate
Elevator, up and down: 3/8" (10mm) 1/2" (13mm)
Ailerons, up and down: 1/2" (13mm) 3/4" (19mm)
Parts needed for flight:
- Battery: 8 cell, 1800mAh (GPMA2431)
- Charger: GPMM3001 or GPMM3150
**to use either charger, adapters will need to be made.
See Completion Guide for details**
- Radio: 3 or 4 channel w/electronic mixing(or optional mixer GPMA2428)
Servos: 2 mini (min. of 15 oz-in torque)
- Speed Control: 15A Electronic (GPMA2429)
- Glue: 6 minute epoxy (GPMR6042)
- Misc. Items: Building and Field Equipment
- Assembly Time: Approximately 30 minutes
Items needed to make this a Brushless system:
- KONG2000 Fun 400-23 Brushless motor
- KONM3100 Jazz 40-6-18 ESC
- Battery
Click Here For all your replacement parts needs. Video 1
See more: Great Planes
|
|
|
