|
Great Planes Little Toni 61 ARF .61-.91,63"
ITEM # GPMGPMA1320-GP
Behold the Cosmic Classic!
A variation of the Cosmic Wind design, the Little Toni Formula One pylon racer was a fierce and famous competitor for decades, reaching a speed of 201.8 mph at the 1970 Miami Races! Great Planes' ARF model is just as capable as a racer, and equally exciting as an aerobatic sport plane — tracking solidly, turning quickly, and slowing gently for smooth, predictable landings.
This is the Radio Controlled, Glow Powered, Almost Ready-to-Fly Great Planes Cosmic Wind Little Toni Sport Pylon Racer Airplane.
27.5% scale (IMAA legal) For Intermediate to Advanced Modeler/Fliers.
Key Features:
- Radio Compartment: Plywood reinforced
- Aileron Control: Dual servo
- Construction: Fiberglass, balsa and plywood
Wing: Balsa and plywood, one-piece
Items Included:
- Pre-built wing fuselage and tail assemblies prebent aluminum main
landing gear, 2 main wheels, tailwheel wire with wheel
- engine mount, hardware package, fiberglass cowling and wheel pants, clear canopy
- decals, aluminum spinner, photo-illustrated instructions
Airplane Specs:
- Wingspan: 63 " (1600mm)
- Wing Area: 775 sq in (50.06 sq dm)
- Weight: 7.25 - 8.25 lb (3290 - 3740g)
- Wing Loading: 21.5 - 24.5 oz/sq ft (65 - 75 g/sq dm)
- Length: 56.5" (1435mm)
- Airfoil: Fully symmetrical, low-wing configuration
- Center of Gravity: 3-3/8" (86mm) Measured from wing's leading edge
at the fuselage sides.
- Control Throws- Low Rate High Rate
Ailerons: Up & Down 1/4" (6mm) 3/8" (10mm)
Elevator: Up & Down 1/2" (13mm) 3/4" (19mm)
Rudder: Right & Left 3/4" (19mm) 1-1/8" (28mm)
Items needed to fly today:
- Engine: .61 cu in (10cc) 2-stroke
OR .91 (15cc) 4-stroke
- Muffler: Stock type supplied with engine, engine mounts at 90° angle
- Radio: 4-Channel
- Servos: 4-with at least 54 oz-in torque 1-with at least 30 oz-in torque (for throttle) (2-ailerons, 1-elevator, 1-rudder, 1-throttle
- Servo Extension: Two 6" (152mm)-for ailerons
- Y-Harness: One-for aileron servos
- Misc. Items: glow plug, 1/4" foam rubber padding, 3' medium
fuel tubing, fuel filter, propeller, building and field equipment.
Items needed to convert this into a brushless motor system:
- KONG5060-Kontronik 600 Brushless Motor Set
- JTCG6801-Motor Mount
- GPMP0741-7-cell NiMH 1900mAh batteries (3 required)
- Charger-Great Planes Triton series
- APCQ4145-14x7 Prop for Electric Motors
- GPMQ4442-Servo Tape
- WSDM3001-Dean's Ultra Plug (quantity depends on how battery pack is assembled)
- GPMQ4610-6mm Prop Adapter
- GPMZ0010-Glow to Electric Conversion Guidelines
Click Here to see our selection of parts and accessories!!
Comments:
Pilot head pictured on box is not included. A 1/4 Scale Sportsman Pilot will fit under canopy.
This spinner differs from the one shown in the manual. It includes a spinner adapter nut that fits the O.S. .61 two stroke and .91 four stroke engines. It may be necessary to shorten the length of the spinner cone attachment bolt depending what propeller you choose.
If a replacement fuel tank is needed the Great Planes 14oz, GPMQ4106 can be used. A separate section of plywood must be glued to the firewall to clear the lip on the replacement tank and the stopper hole re-drilled in the firewall.
**Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at date
of purchase
See more: Great Planes
|
|
|
