Great Planes Super Stearman 1.20 Biplane ARF MonoKote

This is the Radio Controlled, Glow Powered, Almost Ready-to-Fly, Great Planes Super Stearman 1.20 Sport Airplane Kit. For Intermediate to Advanced Modeler/Fliers.

Key Features:

• All main sections feature built-up balsa and plywood.
• Four ailerons (instead of two) give this Stearman "super" agility — especially when each is powered by its own servo. Coupling rods are supplied for when using only two servos.
• The dual cockpits feature vacu-formed windscreens with painted frames, and come complete with a pair of scale pilot figures.
• A steerable tailwheel assembly aids in ground handling.

Items Included:

• Pre-built wing fuselage and tail assemblies, aluminum main landing
  gear, 2-piece engine mount, aluminum spinner
• hardware package fiberglass cowling landing gear fairings and wheel pants, plastic replica radial engine, two detailed pilot figures, wheels
• 24oz fuel
  tank, all assembly hardware, photo-illustrated instructions, and cockpit coaming

Airplane Specs:

• Top Wingspan:       71.5" (1815mm)
• Bottom Wingspan:    69"   (1755mm)
• Total Wing Area:     1466 sq in (94.70 sq dm)
• Weight:       14-15 lb (6.35-6.8kg)
• Wing Loading: 22-23.5 oz/sq ft (67.13-71.71g/sq dm)
• Length:             57" (1450mm)
• Airfoil: Semi-symmetrical
• Center of Gravity: 5-1/2" (140mm) Back from the leading edge of the
  TOP wing
• Control Throws-           Low Rate       High Rate
  Ailerons: Up & Down
  Bottom Wing:         9/16" (14mm)    1"     (25mm)
  Top Wing:            3/4"  (19mm)    1-1/4" (32mm) up
  7/8"  (22mm)    1-1/2" (38mm) down
  Elevator: Up & Down    7/8"  (22mm)    1"     (25mm)
  Rudder: Right & Left 1"      (25mm)    1-1/2" (38mm)

Parts needed to fly today:

• Engine:  .91 (14.9 cc) - 1.20 (19.66cc) 2 or 4 stroke
• Muffler: Pitts style if using 2-stroke engine, or standard muffler
  included with 4-stroke engine
• Radio:   4-channel
• Servos:  5 standard size, 4 with 54 oz-in torque minimum, one with 42 oz-in of torque for throttle (2-ailerons, 1-elevator, 1-rudder, 1-throttle)
• Servo Extension 12": Two for aileron servos
• Y-Harness: One for aileron servos

Parts needed to convert this plane to electric:

• Tango 45-06 (KONG2300) or
  Fun 500-27 (KONG2461)
• Battery: 38A @ 14 cells (16.8V) or
  36A @ 12 cells (14.4V) if using Tango motor or,
  31A @ 12 cells (14.4V)
  29A @ 12 cells (14.4V) for Fun 500-27 motor
• Aeronaut Prop: 13x7 or 14x8 if using Tango motor or
  14x8 or 13x7 if using Fun motor
• APC Prop: 13x6.5E (APCQ3065), or 14x7E (APCQ4145) for Tango motor or 14x7E (APCQ4145), or 13x6.5E (APCQ3065)
• Speed Control: Jazz 40-6-18 (KONM3100)
• Drive Set: Brushless Set 500 (KONG5040) if using Fun motor

See more: Great Planes