This is the radio controlled, glow powered, almost-ready-to-fly / Sonic High Wing sport trainer airplane kit from Phoenix Aircraft Models. / For beginning modeler/flyers. / / FEATURES: Construction: Built-up balsa and plywood / Covering: Pre-applied heat shrink film, color scheme is mostly white / on the fuselage and wings with red, dark blue, and green accents / Wings: Two-piece wood, must be joined before installation / Radio Compartment: Plywood reinforced, easily accessible under wing / Canopy: Silver painted section on fuselage to simulate canopy area, / no canopy or pilot detail / Landing gear: Pre-bent 3/16" (4mm) wire with 2" (51mm) foam rubber / main and nose gear wheels / Single aileron servo: Yes, standard size and torque required / Hardware: Hinges, wing bolts and all other required fasteners / included / Motor Mount: Nylon, pre-mounted in fuselage / / INCLUDES: Prebuilt and pre-covered wings fuselage and tail section tricycle / landing gear with 2" (51mm) wheels, nylon engine mount, pre-bent / pushrods, hardware package, fuel tank, hinges, all hardware and / fasteners and photo-illustrated instructions / / REQUIRES: Engine: .25-.32 cu in (4.1-5.2cc) 2-stroke engine / Muffler: Standard type included with engine / Radio: Four channel / Servos: Four, 42 oz/in torque minimum / (1-aileron, 1-elevator, 1-rudder, 1-throttle) / Misc. Items: 2" (51mm) spinner, 1/4" foam rubber padding, 3' medium / fuel tubing, fuel filter, propeller, building and field equipment / / SPECS: Wingspan: 52.3" (133cm) / Length: 40.9" (104cm) / Airfoil: Flat bottom, high wing / Center of Gravity: 2.75" (70mm) Back from the wing's leading edge / at the fuselage sides. / Control Throws- / Ailerons: Up & Down 0.20" (5mm) / Elevator: Up & Down 0.31" (8mm) / Rudder: Right & Left 0.51" (13mm) / / jxs 7/22/03
See more: Phoenix RC Airplanes
